Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants

Darko Veljić; Časlav Lačnjevac; Marko Rakin; Darko Bajić

doi:10.5937/zasmat2104262M

Autori

Darko Veljić University of Belgrade, Faculty of Technology and Metallurgy, Innovation Center, Serbia Autor
Časlav Lačnjevac University of Belgrade, Faculty of Agriculture, Serbia Autor
Marko Rakin University of Belgrade, Faculty of Technology and Metallurgy, Serbia Autor
Darko Bajić University of Montenegro, Faculty of Mechanical Engineering, Montenegro Autor

DOI:

https://doi.org/10.5937/zasmat2104262M

Ključne reči:

atmosferski plazma sprej, ZrO28%Y2O3, Ni22Cr10Al1, mikrostruktura, međupovršina, mikrotvrdoća, čvrstoća spoja

Apstrakt

Cilj ovog rada bio je da se deponuju višenamenski slojevi prevlake ZrO28%Y2O3 primenom plazma sprej tehnologije, a zatim da se karakterišu takvi slojevi. U kombinaciji sa drugom biomedicinskom keramikom, ova prevlaka je namenjena primeni u modifikaciji površine implantata. spitivanje je bilo usredsređeno na mehanička svojstva i mikrostrukturu slojeva. orišćenjem atmosferskog plazma spreja, dupleks sistem prevlaka ZrO28%Y2O3 / Ni22Cr10Al1 nanet je na nerđajući čelik X15Cr13, sa dve različite debljine vezne i keramičke prevlake. ikrostruktura je analizirana pomoću optičkog mikroskopa, uključujući procenu sadr aja mikro pora. orfologija čestica praha i površina keramičkih prevlaka ispitivane su na skening elektronskom mikroskopu (SE ). valitet slojeva ZrO28%Y2O3 čini ih pogodnim za nanošenje i kombinaciju sa drugim materijalima kako bi se stvorio sistem biomedicinskih ili multifunkcionalnih prevlaka.

Reference

(2008) Implants for surgery: Ceramic materials based on Yttria-stabilized tetragonal zirconia (Y-TZP). International Organization for Standardization (ISO), ISO 13356:2015, 3rd ed.; Technical Committee: ISO/TC 150/SC 1 Materials

(2012) Material product data sheet: AMDRY 9624, Nickel chromium aluminum yttrium (NiCrAlY) thermal spray powders. DSMTS-0102.0, SulzerMetco

(2002) Turbojet engine: Standard practices manual (PN 582005). East Hartford: Pratt & Whitney Aircraft Group

(2012) Material product data sheet: Metco 204NS, 8% Yttria Stabilized Zirconia agglomerated and HOSP™ thermal spray powders. DSMTS-0001.2, SulzerMetco

Azari, Z., Casavola, C., Pappalettere, C., Pruncu, I.C. (2012) Numerical simulation in coated materials: Model of crack propagation bi-material.Integritet i vek konstrukcija, vol. 12, br. 2, str. 125-129

Baker, H. (1992) Alloy phase diagrams. in: ASM Handbook, Ohio, USA: ASM International, Volume 3

Ban, S., Sato, H., Suehiro, Y., Nakanishi, H., Nawa, M. (2008) Biaxial flexure strength and low temperature degradation of CE-TZP/Al2O3nanocomposite and Y-TZP as dental restoratives.Journal of Biomedical Materials Research Part B: Applied Biomaterials, 87B(2), 492-498

https://doi.org/10.1002/jbm.b.31131

Christel, P., Meunier, A., Heller, M., Torre, J.P., Peille, C.N. (1989) Mechanical properties and short-termin vivo evaluation of yttrium-oxide-partially-stabilized zirconia.Journal of Biomedical Materials Research, 23(1), 45-61

https://doi.org/10.1002/jbm.820230105

Dawlat, M., Moustafa, A. (2018) Bioactive-hybridzirconia implant surface for enhancing osseointegration: An in vivo study.Int. J. Implant Dent, 4, 7-15

https://doi.org/10.1186/s40729-018-0129-3

Deville, S., Gremillard, L., Chevalier, J., Fantozzi, G. (2005) A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia.Journal of Biomedical Materials Research Part B: Applied Biomaterials, 72B(2), 239-245

https://doi.org/10.1002/jbm.b.30123

Dey, A., Sinha, A., Banerjee, K., Mukhopadhyay, A.K. (2014) Tribological studies of microplasma sprayed hydroxyapatite coating at low load.Materials Technology, 29(sup1), B35-B40

https://doi.org/10.1179/1753555713Y.0000000105

Dion, I., Bordenave, L., Lefebvre, F., Bareille, R., Baquey, C.H., Monties, J.R., Havlik, P. (1994) Physico-chemistry and cytotoxicity of ceramics.Journal of Materials Science: Materials in Medicine, 5(1), 18-24

https://doi.org/10.1007/BF00121148

Đoković, J.M., Nikolić, R.R., Ilić, D.D., Vičan, J. (2014) Dynamic crack growth along the elastic-plastic bimaterial interface.Integritet i vek konstrukcija, vol. 14, br. 3, str. 161-165

Fassina, P., Zaghini, N., Bukat, A., Piconi, C., Greco, F., Piantelli, S. (1992) Yttria and calcia partially stabilized zirconia for biomedical applications. in: Ravagliogli A., Krajewski A. [ed.] Bioceramics and the Human Body, London: Elsevier Applied Science, 223-229

https://doi.org/10.1007/978-94-011-2896-4_29

Garvie, R.C., Urbani, C., Kennedy, D.R., McNeuer, J.C. (1984) Biocompatibility of magnesia-partially stabilized zirconia (Mg-PSZ) ceramics.Journal of Materials Science, 19(10), 3224-3228

https://doi.org/10.1007/BF00549808

Hertelé, S., Gubeljak, N., de Waele, W. (2014) Advanced characterization of heterogeneous arc welds using micro tensile tests and a two-stage strain hardening ('UGent') model.International Journal of Pressure Vessels and Piping, 119, 87-94

https://doi.org/10.1016/j.ijpvp.2014.03.007

Khlifi, K., Dhiflaoui, H., Zoghlami, L., Ben, C.L.A. (2015) Study of mechanical behavior, deformation, and fracture of nano-multilayer coatings during microindentation and scratch test.Journal of Coatings Technology and Research, 12(3), 513-524

https://doi.org/10.1007/s11998-015-9662-7

Khor, K.A., Fu, L., Lim, V.J.P., Cheang, P. (2000) The effects of ZrO2 on the phase compositions of plasma sprayed HA/YSZ composite coatings.Materials Science and Engineering: A, 276(1-2), 160-166

https://doi.org/10.1016/S0921-5093(99)00495-5

Kozak, D., Damjanović, D., Katinić, M. (2016) Integrity assessment of the butt weld joint with defect according to EN ISO 6520-1 series 400.Struct. Integr. Life, 16, 120-124

Kozelskaya, A.I., Bolbasov, E.N., Golovkin, A.S., Mishanin, A.I., Viknianshchuk, A.N., Shesterikov, E.V., Ashrafov, A., Novikov, V.A., Fedotkin, A.Y., Khlusov, I.A., Tverdokhlebov, S.I. (2018) Modification of the ceramic implant surfaces from zirconia by the magnetron sputtering of different calcium phosphate targets: A comparative study.Materials, 11(10), 1949-1957

https://doi.org/10.3390/ma11101949

Kumar, P., Dehiya, B.S., Sindhu, A. (2018) Bioceramics for hard tissue engineering applications: A review.International Journal of Applied Engineering Research, 13, 2744-2752

Lang, H., Mertens, T. (1990) The use of cultures of human osteoblastlike cells as an in vitro test system for dental materials.Journal of Oral and Maxillofacial Surgery, 48(6), 606-611

https://doi.org/10.1016/S0278-2391(10)80475-6

Magdi, M.F., Kobayashi, A. (2007) Microstructure and mechanical properties of HA/ZrO2 coatings by gas tunnel plasma spraying.Transaction of JWRI, 36(1), pp. 47-51

Marcelli, E., Costantino, M.L., Villa, T., Bagnoli, P., Zannoli, R., Corazza, I., Cercenelli, L. (2014) Effect of intermediate ZrO2-CaO coatings deposited by cold thermal spraying on the titanium-porcelain bond in dental restorations.Journal of Prosthetic Dentistry, 112(5), 1201-1211

https://doi.org/10.1016/j.prosdent.2014.05.005

Mrdak, M., Lačnjevac, Č., Rakin, M., Bajić, N. (2019) Karakterizacija plazma sprej bioinertne prevlake Al2O328tež.%MgO.Zaštita materijala, vol. 60, br. 1, str. 44-49

https://doi.org/10.5937/zasmat1901044M

Mrdak, M., Lačnjevac, Č., Rakin, M. (2018) Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber.Zaštita materijala, vol. 59, br. 2, str. 167-172

https://doi.org/10.5937/ZasMat1802167M

Mrdak, M., Lačnjevac, Č., Rakin, M., Bajić, N. (2018) Characterization of tantalum coatings deposited using vacuum plasma spray process.Zaštita materijala, vol. 59, br. 4, str. 489-494

https://doi.org/10.5937/zasmat1804489M

Mrdak, M.R. (2012) Study of the properties of plasma deposited layers of nickel-chrome-aluminium-yttrium coatings resistant to oxidation and hot corrosion.Vojnotehnički glasnik, vol. 60, br. 2, str. 182-201

https://doi.org/10.5937/vojtehg1202182M

Nistor, L., Gradinaru, M., Rica, R., Marasescu, P., Stan, M., Manolea, H., Ionescu, A., Moraru, I. (2019) Zirconia use in dentistry: Manufacturing and properties.Curr Health Sci J, 45, 28-35

Penkov, O.V., Khadem, M., Lim, W.S., Kim, D.E. (2015) A review of recent applications of atmospheric pressure plasma jets for materials processing.Journal of Coatings Technology and Research, 12(2), 225-235

https://doi.org/10.1007/s11998-014-9638-z

Sadowski, T., Marsavina, L. (2011) Multiscale modelling of two-phase ceramic matrix composites.Computational Materials Science, 50(4), 1336-1346

https://doi.org/10.1016/j.commatsci.2010.04.011

Saremi, M., Afrasiabi, A., Kobayashi, A. (2007) Bond coat oxidation and hot corrosion behavior of plasma-sprayed YSZ coating on Ni superalloy.Trans. JWRI, 36, 41-45

Škorić, B., Kakaš, D., Gredić, T. (1998) Influence of plasma nitriding on mechanical and tribological properties of steel with subsequent PVD surface treatments.Thin Solid Films, 317(1-2), 486-489

https://doi.org/10.1016/S0040-6090(97)00565-8