Korišćenje drveta kao građevinskog materijala nove generacije u kontekstu održivog razvoja

Autori

  • Akiner Muhammed Ernur Akdeniz University, Vocational School of Technical Sciences, Antalya, Turkey Autor
  • İlknur Akiner Akdeniz University, Department of Architecture, Faculty of Architecture, Antalya, Turkey Autor
  • Nurdan Akiner Akdeniz University, Faculty of Communication, Department of Radio, Television and Cinema, Antalya, Turkey Autor
  • Pancovska Valentina Zileska University "Ss. Cyril and Methodius", Faculty of Civil Engineering, Technology and Organization of Construction, Skopje, Republic of North Macedonia Autor

DOI:

https://doi.org/10.5937/zasmat2201068A

Ključne reči:

drvo, građevinski materijal, održivost, humana psihologija

Apstrakt

Drvo je prirodni resurs koji je obnovljiv, lako povrativ i skladišti ugljen-dioksid, čine i drvene konstrukcije izvodljivom alternativom za postizanje značajnih ciljeva održivosti. Devedesetih godina prošlog veka, tehnološki polaznici su izmislili lamelirane drvene grede i počelo je da se primenjuje princip rešenih rešetki na građevinske strukture od laminata i šperploče. Metoda hibridne gradnje nove generacije nazvana Urban Timber (UT) sistem je dizajniranja da podrži drvene zgrade na osnovu dijagnostičke ranjivosti drvenih konstrukcija. Sistem je definisan i demonstriran uzimaju i u obzir ponašanje konstrukcije, arhitektonsku vrednost. Sve ostalo je prepušteno dizajnerskom nahođenju, njegovoj osetljivosti i, pre svega, njegovoj sposobnosti da iskoristi tehnologiju iz mnogih prednosti i mnogostranosti. straživanje nastoji da in ormiše budu e generacije o predviđenim održivim karakteristikama drvenih konstrukcija, koje su kamen temeljac globalne građevinske industrije, u uobičajenim okolnostima nove industrije. U tom cilju, dokazano je zašto su industrijalizovani sistemi drvenih građevinskih objekata undamentalni problem u kontekstu sadašnje ekološke, društvene i psihološke diskusije i koriš enja različitih pristupa građenju koriste i održive materijale. Drvo se, prema nalazima, vidi kao budu i građevinski materijal.

Reference

(2020) State of Europe's Forests. https://unece.org/forest-resources-0# FOREST EUROPE SoEF Report https://foresteurope.org/wpcontent/uploads/2016/08/SoEF_2020.pdf [Accessed on May 21, 2021]

(2020) North American Mass Timber Report. https://www.masstimberreport.com/free-digital [Accessed on June 21, 2021]

APA-The Engineered Wood Association (2011) Standard for Performance-Rated Cross-Laminated Timber, ANSI/APA PRG 320. Tacoma, Washington, USA

Awad, J.C.J. (2021) The Improvement of Indoor Air Quality in Residential Buildings in Dubai, UAE.Buildings, 11(6): 250-250

https://doi.org/10.3390/buildings11060250

Chen, Y. (2012) Comparison of environmental performance of a five-storey building built with cross-laminated timber and concrete. Thesis

Corpataux, L., Okuda, S., Kua, H.W. (2020) Panel and plate properties of Cross-laminated timber (CLT) with tropical fast-growing timber species in compliance with Eurocode 5.Construction and Building Materials, 261: 119672

https://doi.org/10.1016/j.conbuildmat.2020.119672

Darby, H.J., Elmualim, A., Kelly, F. (2013) A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building. in: Proceedings of the Sustainable Building Conference, Munich, Germany, 10-12

Dehne, M., Krueger, U. (2006) Fire protection in multistory timber construction.Detail, 10: 1142-1144

Eijkelenboom, A., Verbeek, H., Felix, E., van Hoof, J. (2017) Architectural factors influencing the sense of home in nursing homes: An operationalization for practice.Frontiers of Architectural Research, 6(2): 111-122

https://doi.org/10.1016/j.foar.2017.02.004

European Environment Agenc (2014) Resource-efficient green economy and EU Policies. in: EEA report, Luxembourg: Publications Office of the European Union, 2

Evans, L. (2013) Cross Laminated Timber: Taking wood buildings to the next level. Architectural Records

Flaga, K. (2000) Advances in materials applied in civil engineering.Journal of Materials Processing Technology, 106(1-3), 173-183

https://doi.org/10.1016/S0924-0136(00)00611-7

Gasparri, B.A.E. (2020) Hygrothermal behaviour of emerging timber-based envelope technologies in Australia: A preliminary investigation on condensation and mould growth risk.Journal of Cleaner Production, 276: 124129

https://doi.org/10.1016/j.jclepro.2020.124129

Greeno, C.R.R. (2006) Building Construction Handbook. Routledge

Gustavsson, L., Pingoud, K., Sathre, R. (2006) Carbon dioxide balance of wood substitution: comparing concrete-and wood-framed buildings.Mitigation and adaptation strategies for global change, 11(3), 667-691

https://doi.org/10.1007/s11027-006-7207-1

Hammond, G.P., Jones, C.I. (2008) Embodied energy and carbon in construction materials.Proceedings of the Institution of Civil Engineers - Energy, 161(2): 87-98

https://doi.org/10.1680/ener.2008.161.2.87

Ikei, H., Song, C., Miyazaki, Y. (2017) Physiological effects of wood on humans: a review.Journal of Wood Science, 63(1): 1-23

https://doi.org/10.1007/s10086-016-1597-9

Jiménez, P., Dunkl, A., Eibel, K., Denk, E., Grote, V., Kelz, C., Moser, M. (2016) Wood or Laminate?-Psychological Research of Customer Expectations.Forests, 7(12): 275-285

https://doi.org/10.3390/f7110275

John, S., Nebel, B., Perez, N., Buchanan, A. (2009) Environmental Impacts of Multistorey Buildings Using Different Construction Materials.Report. Christchurch, New Zealand: Department of Civil and Natural Resources Engineering. University of Canterbury

Julin, J., Säilä, P., Talonpoika, L., Aho, M., Kaarakka, V., Kyyrönen, K. (2010) The international promotion of wood construction as a part of climate policy. in: Working Group Report, Helsinki: Ministry of Foreign Affairs of Finland

Kuluöztürk, M.F., Büyüksaraç, A., Özbey, F., Yalçin, S., Doğru, M. (2019) Determination of indoor radon gas levels in some buildings constructed with Ahlat stone in Ahlat/Bitlis.International Journal of Environmental Science and Technology, 16(9): 5033-5038

https://doi.org/10.1007/s13762-018-1692-0

Kwan, J. (2013) An investigation of the new opportunities of wood in mid-rise construction in British Columbia. in: Forestry Undergraduate Essays/Theses, 2012 Winter Session, WOOD, University of British Columbia, 493

Laguarda, M.F. (2017) Critical Factors in the Willingness to Adopt Innovative Woodbased Building Materials in the Construction Industry: The Case of CLT. University of Minnesota, Doctoral dissertation

Laguarda, M.F., Espinoza, O. (2015) Awareness, perceptions and willingness to adopt CrossLaminated Timber by the architecture community in the United States.Journal of Cleaner Production, 94, 198-210

https://doi.org/10.1016/j.jclepro.2015.01.090

Lehmann, L.F.S. (2007) Multi-Storey Residential Timber Construction: Current Developments in Europe.Journal of Green Building, 2(1): 119-129

https://doi.org/10.3992/jgb.2.1.119

Lehmann, S., Hamilton, C. (2011) Sustainable Infill Development using Low Carbon CLT Prefabrication: Adaptation for the South Australian Context. Adelaide, Australia: Zero Waste SA Research Centre for Sustainable Design and Behaviour: University of South Australia

Lehmann, S. (2012) Sustainable construction for urban infill development using engineered massive wood panel systems.Sustainability, 4(10), 2707-2742

https://doi.org/10.3390/su4102707

Lehmann, S. (2013) Low carbon construction systems using prefabricated engineered solid wood panels for urban infill to significantly reduce greenhouse gas emissions.Sustainable Cities and Society, 6: 57-67

https://doi.org/10.1016/j.scs.2012.08.004

Lou, G., Wang, C., Jiang, J., Jiang, Y., Wang, L., Li, G.Q. (2018) Fire tests on full-scale steel portal frames against progressive collapse.Journal of Constructional Steel Research, 145, 137-152

https://doi.org/10.1016/j.jcsr.2018.02.024

Lyapin, A. (2021) The influence of regional traditions on the use of wood in works of contemporary American architects.IOP Conference Series: Earth and Environmental Science, 751(1), p. 012091

https://doi.org/10.1088/1755-1315/751/1/012091

Mardookhy, M., Sawhney, R., Ji, S., Zhu, X., Zhou, W. (2014) A study of energy efficiency in residential buildings in Knoxville, Tennessee.Journal of Cleaner Production, 85: 241-249

https://doi.org/10.1016/j.jclepro.2013.09.025

Marsono, B.A.A. (2017) Strategies for reducing greenhouse gas emissions from residential sector by proposing new building structures in hot and humid climatic conditions.Building and Environment, 124: 357-368

https://doi.org/10.1016/j.buildenv.2017.08.025

Miyazaki, I.H.Y. (2020) Positive physiological effects of touching sugi (Cryptomeria japonica) with the sole of the feet.Journal of Wood Science, 66(1): 1-12

https://doi.org/10.1186/s10086-020-01876-1

Nakayama, Y., Nakaoka, H., Suzuki, N., Tsumura, K., Hanazato, M., Todaka, E., Mori, C. (2019) Prevalence and risk factors of pre-sick building syndrome: characteristics of indoor environmental and individual factors.Environmental Health and Preventive Medicine, 24(1): 1-10

https://doi.org/10.1186/s12199-019-0830-8

Patterson, D. (2013) Forté. Creating the World's Tallest CLT Apartment Building. in: US CLT Symposium, Seattle

Pietrasanta, C.F.M. (2014) Innovative Timber Construction: Sustainability and Gigh Performance Building Skin.International Journal of Engineering and Technology, 6(1), 47-56

https://doi.org/10.7763/IJET.2014.V6.664

Porteous, J., Kermani, A. (2013) Structural Timber Design to Eurocode 5. John Wiley & Sons

Ramage, M., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D., Allwood, J. (2017) The wood from the trees: The use of timber in construction.Renewable and Sustainable Energy Reviews, 68: 333-359

https://doi.org/10.1016/j.rser.2016.09.107

Read, D., Freer-Smith, P., Morison, J.I., Hanley, N., West, C., Snowdon, P. (2009) Combating climate change: a role for UK forests. An assessment of the potential of the UK's trees and woodlands to mitigate and adapt to climate change. The Stationery Office Limited

Rice, J., Kozak, R., Meitner, M., Cohen, D. (2006) Appearance wood products and psychological wellbeing.Wood and Fiber Science, 38(4): 644-659

Ricketts, M.F.J.T. (2001) Building design and construction handbook. McGraw-Hill Education

Riggio, M., Alhariri, N., Hansen, E. (2020) Paths of innovation and knowledge management in timber construction in North America: a focus on water control design strategies in CLT building enclosures.Architectural Engineering and Design Management, 16(1), 58-83

https://doi.org/10.1080/17452007.2019.1617672

Robertson, A., Lam, F., Cole, R. (2012) A Comparative Cradle-to-Gate Life Cycle Assessment of Mid-Rise Office Building Construction Alternatives: Laminated Timber or Reinforced Concrete.Buildings, 2(3): 245-270

https://doi.org/10.3390/buildings2030245

Rodrigues, N., Providência, P., Dias, A. (2017) Sustainability and lifecycle assessment of timberconcrete composite bridges.Journal of Infrastructure Systems, 23(1), 04016025

https://doi.org/10.1061/(ASCE)IS.1943-555X.0000310

Ross, R.J. (2010) Wood handbook: Wood as an engineering material. in: General Technical Report, Madison, WI: USDA Forest Service - Forest Products Laboratory, FPL-GTR-190, 509 p

https://doi.org/10.2737/FPL-GTR-190

Sherwood, G., Stroh, R.C. (2012) Wood-frame house construction. Courier Corporation

Silva, C., Branco, J., Lourenço, P. (2013) A project contribution to the development of sustainable multistorey timber buildings. in: Portugal SB13-Contribution of Sustainable Building to Meet EU 20-20-20 Targets, 379-386

SOM (2013) Timber Tower Research Project. Retrieved 2018 from http://www.som.com/ ideas/research/timber_tower_research_project

Song, C., Ikei, H., Miyazaki, Y. (2016) Physiological Effects of Nature Therapy: A Review of the Research in Japan.International Journal of Environmental Research and Public Health, 13(8): 781-789

https://doi.org/10.3390/ijerph13080781

Stanić, A., Hudobivnik, B., Brank, B. (2016) Economicdesign optimization of cross-laminated timber plates with ribs.Composite Structures, 154, 527-537

https://doi.org/10.1016/j.compstruct.2016.07.072

Straube, J., Burnett, E. (2005) Building Science for Building Enclosure Design. Somerville, MA: Building Science Press

The United Nations Economic Commission For Europe -.Unece (2021) The 21st Century will be the century of wood. https://unece.org/forestry/press/21st-century-will-becentury-wood [Accessed on June 21, 2021]

Tsunetsugu, Y., Miyazaki, Y., Sato, H. (2007) Physiological effects in humans induced by the visual stimulation of room interiors with different wood quantities.Journal of Wood Science, 53(1): 11-16

https://doi.org/10.1007/s10086-006-0812-5

Tzonis, A. (2007) Rethinking Design Methodology for Sustainable Social Quality. in: Tropical Sustainable Architecture, 35-46

https://doi.org/10.4324/9780080470924-9

Werther, N., O'Neill, W., Spellman, P., Abu, K., Moss, P., Buchanan, A., Winter, S. (2012) Parametric Study of Modelling Structural Timber in Fire with Different Software Packages. in: Proc. The 7th International Conference on Structures in Fire, Zurich

Winter, W., Tafreshi, K., Fadai, A., Pixner, T. (2010) Development of wood based sustainable construction methods for high-rise buildings under lateral loading. High rise towers and tall buildings. in: High rise towers and tall buildings, 1-8

##submission.downloads##

Objavljeno

2022-03-15

Broj časopisa

Rubrika

Articles