Synergistic effect of inhibitors on corrosion of reinforced concrete structures according to American Concrete Institute standards

Autori

  • Mena Khaleel Tweek Department of Materials Engineering, Faculty of Engineering, University of Kufa, Iraq Autor
  • Shaymaa Abbas Abdulsada Department of Materials Engineering, Faculty of Engineering, University of Kufa, Iraq Autor https://orcid.org/0000-0001-7006-2950

DOI:

https://doi.org/10.62638/ZasMat1105

Ključne reči:

Green inhibitor, Sodium benzoate, Reinforced concrete, Compressive strength, Optical microscopy

Apstrakt

The application of low-cost, low-toxic corrosion inhibitors lowers the rate of corrosion of reinforced concrete in a salt-aqueous medium. The purpose of this work is to compare an innovative, supposedly environmentally benign inhibitor derived from fruit waste (pomegranate peels extract (PPE)) with sodium benzoate, an organic inhibitor. The inhibitors were introduced to the concrete mixture at quantities of two and four percent by weight of cement according to ACI standards. The maximum extraction yield in terms of entire phenolic content was obtained by using an aqueous solvent and the Soxlet technique. The efficiency of corrosion inhibitors in preventing corrosion was investigated using compressive strength and optical microscopy methods. PPE forms an organic layer made up of several components in a variety of salt environments, providing both a chemical antioxidant activity and a mixed-type corrosion inhibitor, most likely due to the polyphenol concentrations.

Reference

Tweek, M. K., and S. A. Abdulsada. "Improvement corrosion properties of reinforcement concrete by corrosion inhibitors: A brief review." Koroze a Ochrana Materialu 67 (2023): 50-58. https://doi.org/10.2478/kom-2023-0007.

Shaymaa, A. A., R. Bak, A. Heczel, and I. T. Tamás. "Corrosion studies on XD3 reinforced concrete samples prepared by using calcium nitrate as inorganic corrosion inhibitor with different superplasticizers." Koroze a Ochrana Materialu 64 (2020): 11-18. https://doi.org/10.2478/kom-2020-0002.

Shaymaa, A. A., and A. I. Al-Mosawi. "Analysis of corrosion rate, inhibition efficiency, and economic cost of XD3 reinforced concrete related to inhibitor and plasticiser types." Engineering Research Express 5 (2023): 035032. https://doi.org/10.1088/2631-8695/acee46.

Shaymaa, A. A., I. T. Tamás, and É. Farkas. "Preliminary corrosion testing of steel rebar samples in 3.5% NaCl solution with and without a green inhibitor." Építőanyag - Journal of Silicate Based and Composite Materials 70 (2018): 48-53. https://doi.org/10.14382/epitoanyag-jsbcm.2018.10.

Shaymaa, A. A., É. Farkas, and I. T. Tamás. "Corrosion testing on steel reinforced XD3 concrete samples prepared with a green inhibitor and two different superplasticizers." Materials and Corrosion 70 (2019): 1262-1272. https://doi.org/10.1002/maco.201810695.

Shaymaa, A. A., É. Farkas, and I. T. Tamás. "Corrosion studies of steel rebar samples in neutral sodium chloride solution also in presence of a bio-based (green) inhibitor." International Journal of Corrosion and Scale Inhibition 7 (2018): 38-47. https://doi.org/10.17675/2305-6894-2018-7-1-4.

Shaymaa, A. A., and I. T. Tamás. "Studying chloride ions and corrosion properties of reinforced concrete with a green inhibitor and plasticizers." Structural Concrete 21 (2020): 1894-1904. https://doi.org/10.1002/suco.201900580.

Shaymaa, A. A., and I. T. Tamás. "Investigations on the resistivity of XD3 reinforced concrete for chloride ions and corrosion with calcium nitrate inhibitor and superplasticizers." Cement Wapno Beton 25 (2020): 330-343. https://doi.org/10.32047/cwb.2020.25.4.7.

Shaymaa, A. A., K. Ferenc, and I. T. Tamás. "Distribution of corrosion products at the steel-concrete interface of XD3 concrete samples." Magazine of Civil Engineering 100 (2020): 10005. https://doi.org/10.18720/MCE.100.5.

Shaymaa, A. A., and A. I. Al-Mosawi. "Using of nucleus dates waste with a nanoscale particles as a green inhibitor." International Journal of Mechanical & Mechatronics Engineering 16 (2016): 27-32.

Kurdowski, W. "Mineral additions for cement production." Cement and Concrete Chemistry (2014): 533-583. https://doi.org/10.1007/978-94-007-7945-7_7.

Söylev, T. A., and M. Richardson. "Corrosion inhibitors for steel in concrete: State-of-the-art report." Construction and Building Materials 22, no. 4 (2008): 609-622. https://doi.org/10.1016/j.conbuildmat.2006.10.013.

Central Organization for Standardization and Quality Control (COSQC). "Iraqi standard specification No.5. IQS 5-19, 'Portland Cement'." Baghdad, Iraq, 2019.

Central Organization for Standardization and Quality Control (COSQC). "Iraqi standard specification No.45. IQS 45-84, 'Aggregate from Natural Sources for Concrete and Construction'." Baghdad, Iraq, 1984.

American Concrete Institute (ACI). "Standard practice for selecting proportions for normal, heavyweight, and mass concrete." ACI Manual of Concrete Practice (1996): 1-38.

Stanish, K., R. D. Hooton, and M. D. Thomas. "Testing the chloride penetration resistance of concrete: a literature review." 2001.

British Standards Institution (BSI). "Method for Determination of Compressive Strength of Concrete Cubes." BS 1881-116 (1983).

Matlob, L. D. F. K., A. M. A. Amir, and N. F. Hassan. "Effect of using corrosion inhibitors on concrete properties and their activity." Journal of Kerbala University 6, no. 4 (2008): 121-139. https://doi.org/10.1201/b11570-30.

Baskaran, J., and S. Paramasivam. "Performance of pomegranate peel extract coated rebars in concrete." Građevinar 75, no. 09 (2023): 883-892. https://doi.org/10.14256/JCE.3511.2022.

Kareem, W. S. A. "Strength Behavior of Concrete Using Pomegranate Peel Admixture." Journal of Engineering and Sustainable Development 21, no. 5 (2017): 184-199.

##submission.downloads##

Objavljeno

2024-07-18

Broj časopisa

Rubrika

Scientific paper