Recent findings on corrosion of ferritic stainless steel weldments: A review
DOI:
https://doi.org/10.5937/zasmat2304372NAbstract
This study covers the review of the degradation of ferritic stainless-steel weldments between 2015 and 2022. The industrial and automotive sectors make extensive use of ferritic stainless steel (FSS) due to its superior oxidation and corrosion resistance, low price, high thermal conductivity, and low thermal expansion. However, it has been reported that ferritic stainless steel is harder to weld than austenitic stainless steel and that doing so would probably result in a weaker welded joint owing to the coarsening of grains high welding temperatures. According to past research, the amount of heat applied during the welding procedure affected how soon the FSS (409 M) weldment degraded after being exposed to NaCl (3.5%) medium. The coarsening of the grains was considered to be the cause of this. When the shielding gas' CO2 content increased, the intergranular corrosion of the FSS weld metal was found to increase. Welds made with the ER430LNb filler metal had significantly lower intergranular corrosion of FSS (AISI 441) than those made with the ER430Ti filler metal. It was discovered that boiling Cu-CuSO4 - 50% H2SO4 solution increased the corrosion rate for the FSS (AISI 430) weldment more than boiling 40% HNO3 Solution. Weldments made of FSS (AISI 430) were found to be negatively affected by the CuCuSO4 - 50% H2SO4 environment in terms of intergranular corrosion attack.References
Akram, J., Kalvala, P.R., Misra, M., Charit, I. (2017) Creep behavior of dissimilar metal weld joints between P91 and AISI 304.Materials Science and Engineering: A, 688, 396-406
https://doi.org/10.1016/j.msea.2017.02.026
Ambade, S., Tembhurkar, C., Patil, A.P., Pantawane, P., Singh, P.R. (2022) Shielded metal arc welding of AISI 409M ferritic stainless steel: A study on mechanical, intergranular corrosion properties and microstructure analysis.World Journal of Engineering, 19(3), 266-273
https://doi.org/10.1108/WJE-03-2021-0146
Ambade, S., Tembhurkar, C., Patil, A., Meshram, D.B. (2022) Effect of several welding passes on the microstructure, mechanical and intergranular corrosion properties of 409M ferritic stainless steel.World Journal of Engineering, 19(3), 368-374
https://doi.org/10.1108/WJE-11-2020-0591
Ambade, S.P., Sharma, A., Patil, A.P., Puri, Y.M. (2020) Effect of welding processes and heat input on corrosion behaviour of Ferritic stainless steel 409M.Materials Today: Proceedings
https://doi.org/10.1016/j.matpr.2020.06.251
Anyakwo, C.N., Ndukwe, A.I. (2017) Mathematical model for corrosion inhibition of mild steel in hydrochloric acid by crushed leaves of tridax procumbens (asteraceae).International journal of science and engineering investigations, 6(65), 81-89, http://www.ijsei.com/papers/ijsei-66517-13.pdf
Anyakwo, C.N., Ndukwe, A. (2017) Prognostic model for corrosion-inhibition of mild steel in hydrochloric acid by crushed leaves of voacanga Africana.International journal of computational and theoretical chemistry, 2(3), 31-42
Azo, M. (2020) Characteristics of ferritic stainless steel strip. https://www.azom.com/article.aspx?ArticleID=19195
Balasubraanian, L.A.K.V. (2013) Use of DL-EPR test to assess sensitization resistance of AISI 409M grade ferritic stainless steel joints.J. Mater Eng Perform, 22, 2293-2303
https://doi.org/10.1007/s11665-013-0521-3
Callister, W.D., Rethwisch, D.G. (2013) Materials science and engineering: an introduction. New York: Wiley & Sons
Corrosionpedia, C. (2023) Weld decay. https://www.corrosionpedia.com/definition/1172/weld-decay
Dak, G., Pandey, C. (2020) A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application.Journal of Manufacturing Processes, 58, 377-406
https://doi.org/10.1016/j.jmapro.2020.08.019
Dan, N.E., Mahmud, M.S., Hussain, P., Mohebbi, H., Kakooei, S. (2018) Physical and mechanical properties of heat affected zone of dissimilar welds between duplex stainless steel and low carbon steel.AIP Conference Proceedings, 2035(1), 080007: AIP Publishing LLC
https://doi.org/10.1063/1.5075606
Davis, J.R. (2006) Corrosion of weldments. Ohio: ASM international
https://doi.org/10.31399/asm.tb.cw.9781627083393
de Caetano, G.Q., Silva, C.C., Motta, F., Miranda, H.C., Farias, J.P., Bergmann, L.A., Dos, S.J.F. (2019) Intergranular corrosion evaluation of friction stir welded AISI 410S ferritic stainless steel.Journal of Materials Research and Technology, 8(2), 1878-1887
https://doi.org/10.1016/j.jmrt.2019.01.004
Filho, F.D., Reis, R.P., Ferraresi, V. (2019) Effect of shielding gas composition on intergranular corrosion of stabilized ferritic stainless steel GMA welds.Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(2), 78-86
https://doi.org/10.1007/s40430-019-1571-8
Ghosh, K.S. (2022) Foundation of welding technology. Delhi: PHI Learning Pvt. Ltd
Ghosh, N., Pal, P.K., Nandi, G. (2017) GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using AISI 308 filler wire.Engineering Science and Technology, an International Journal, 20(4), 1334-1341
https://doi.org/10.1016/j.jestch.2017.08.002
Grill, J. (2022) What is GMAW (MIG welding) & how does it work?. https://weldguru.com/mig-welding
Guo, N., Yang, Z., Wang, M., Yuan, X., Feng, J. (2015) Microstructure and mechanical properties of an underwater wet welded dissimilar ferritic/ austenitic steel joint.Strength of Materials, 47(1), 12-18
https://doi.org/10.1007/s11223-015-9622-6
Gupta, S.K., Patil, A.P., Rathod, R.C., Tandon, V., Vashishtha, H. (2022) Investigation on impact of heat input on microstructural, mechanical, and intergranular corrosion properties of gas tungsten arc-welded Ti-stabilized 439 ferritic stainless steel.J. of Materi Eng and Perform, 31, 4084-4097
https://doi.org/10.1007/s11665-021-06512-7
Gupta, S.K., Patil, A.P., Rathod, R., Tandon, V., Ambade, S. (2022) Effect of gas tungsten arc welding on the microstructural, mechanical and corrosion properties of Ti-stabilized 439 ferritic stainless steel.Journal home page for Materials Today: Proceedings, 50(5), 1570-1574
https://doi.org/10.1016/j.matpr.2021.09.116
Gupta, S.K., Raja, A.R., Vashista, M., Yusufzai, M.Z.K. (2020) Effect of gas metal arc welding on magnetic response of ferritic stainless steel.Arabian Journal for Science and Engineering
https://doi.org/10.1007/s13369-020-04338-4
Hu, S., Pang, J., Shen, J., Wu, W., Liu, L. (2016) Microstructure, mechanical property and corrosion resistance property of Cr26Mo3.5 super ferritic stainless joints by P-TIG and laser welding.Transactions of Tianjin University, 22(5), 451-457
https://doi.org/10.1007/s12209-016-2932-3
Karthick, K., Malarvizhi, S., Balasubramanian, V., Krishnan, S.A., Sasikala, G., Albert, S.K. (2016) Tensile properties of shielded metal arc welded dissimilar joints of nuclear grade ferritic steel and austenitic stainless steel.Journal of the Mechanical Behavior of Materials, 25(5-6), 231-239
https://doi.org/10.1515/jmbm-2017-0005
Keskitalo, M., Sundqvist, J., Mäntyjärvi, K., Powell, J., Kaplan, A.F.H. (2015) The influence of shielding gas and heat input on the mechanical properties of laser welds in ferritic stainless steel.Physics Procedia, 78,222-229
https://doi.org/10.1016/j.phpro.2015.11.032
Kim, J., Kim, Y., Uhm, S., Lee, J., Kim, K. (2009) Intergranular corrosion of Ti-stabilized 11 wt% Cr ferritic stainless steel for automotive exhaust systems.Corros Sci, 51, 2716-2723
https://doi.org/10.1016/j.corsci.2009.07.008
Kim, J.K., Lee, K.Y., Kim, Y. (2012) Intergranular precipitation and corrosion in the weld of low Cr ferritic stainless steel.Met. Mater. Int, 18, 619-624
https://doi.org/10.1007/s12540-012-4008-9
Kopeliovich, D. (2012) Shielded Metal Arc Welding (SMAW). https://www.substech.com/dokuwiki/doku.php?id=shielded_metal_arc_wel ding_smaw
Liu, H., Hu, Y. (2022) Welding. in: Encyclopedia of Materials: Metals and Alloys, 3, 39-65
https://doi.org/10.1016/B978-0-12-819726-4.00143-5
Liu, P., Yu, R., Gao, X., Zhang, G. (2020) Influence of surface ultrasonic rolling on microstructure and corrosion property of T4003 ferritic stainless steel welded joint.Metals, 10(8), 1081-1091
https://doi.org/10.3390/met10081081
Mathers, G. (2023) Welding of ferritic/martensitic stainless steels. TWI, https://www. twi-global.com/technical-knowledge/job-knowledge /welding-of-ferritic-martensitic-stainless-steels-101
Moore, J.J., Boyce, E.A., Brooks, M.J., Perry, B., Sheridan, P.J. (1981) Chemical metallurgy. London: Butterworths
Ndukwe, A.I., Anyakwo, C.N. (2017) Corrosion inhibition model for mild steel in sulphuric acid by crushed leaves of clerodendrum splendens (verbenaceae).IJSEAS, 3(3), 39-49, http://ijseas.com/volume3/v3i3/ijseas20170305.pdf
Ndukwe, A.I., Anyakwo, C.N. (2017) Predictive corrosion-inhibition model for mild steel in sulphuric acid (H2SO4) by leaf-pastes of sida acuta plant.Journal of civil, construction and environmental engineering, 2(5), 123-133
Ndukwe, A.I., Anyakwo, C.N. (2017) Modelling of corrosion inhibition of mild steel in sulphuric acid by thoroughly crushed leaves of voacanga Africana (apocynaceae).AJER, 6(1), 344-356, https://www.ajer.org/papers/v6(01)/ZX060344356.pdf
Ndukwe, A.I. (2022) Green inhibitors for corrosion of metals in acidic media: a review.AJME, 20(2), 36-50; https://ajme.ro/PDF_AJME_2022_2/L5.pdf
Ndukwe, A.I., Anyakwo, C.N. (2017) Modelling of corrosion inhibition of mild steel in hydrochloric acid by crushed leaves of sida acuta (malvaceae).THEIJES, 6(1), 22-33. https://www.theijes.com/papers/vol6-issue1/Version-3/D0601032233.pdf
https://doi.org/10.9790/1813-0601032233
Ndukwe, A.I., Anyakwo, C.N. (2017) Predictive model for corrosion inhibition of mild steel in HCl by crushed leaves of clerodendrum splendens.IRJET, 4(2), 679-688, https://irjet.net/archives/V4/i2/IRJETV4I2129.pdf
Pandey, C. (2020) Mechanical and metallurgical characterization of dissimilar P92/SS304 L welded joints under varying heat treatment regimes.Metall Mater Trans A, 51, 2126-2142
https://doi.org/10.1007/s11661-020-05660-0
Rajamurugan, G., Mahendiran, P. (2016) Experimental investigation of parameters and its effect on IGC attack in ferritic stainless steel 430 weldments.Applied Mechanics and Materials, 854, 10-17
https://doi.org/10.4028/www.scientific.net/AMM.854.10
Rathod, D.W., Pandey, S., Singh, P.K., Prasad, R. (2015) Experimental analysis of dissimilar metal weld joint: Ferritic to austenitic stainless steel.Materials Science and Engineering: A, 639, 259-268
https://doi.org/10.1016/j.msea.2015.05.011
Shome, M., Tumuluru, M. (2015) Introduction to welding and joining of advanced high-strength steels (AHSS). in: Welding and Joining of Advanced High Strength Steels (AHSS), p.1-8
https://doi.org/10.1016/B978-0-85709-436-0.00001-1
Sommer, N., Warres, C., Lutz, T., Kahlmeyer, M., Böhm, S. (2022) Transmission electron microscopy study on the precipitation behaviors of laserwelded ferritic stainless steels and their implications on intergranular corrosion resistance.Metals, 12(1), 56-68
https://doi.org/10.3390/met12010086
Sommer, N., Grimm, L.C., Wolf, C., Böhms, C. (2021) A novel approach to inhibit intergranular corrosion in ferritic stainless steel welds using high-speed laser cladding.Metals, 11(12), 322-334
https://doi.org/10.3390/met11122039
Tembhurkar, C., Kataria, R., Ambade, S., Verma, J., Sharma, A., Sarkar, S. (2021) Effect of fillers and autogenous welding on dissimilar welded 316L austenitic and 430 ferritic stainless steels.Journal of Materials Engineering and Performance, 30(2), 1444-1453
https://doi.org/10.1007/s11665-020-05395-4
Touileb, K., Ouis, A., Djoudjou, R., Hedhibi, A.C., Alrobei, H., Albaijan, L., Alzahrani, B., Sherif, E., Abdo, H. (2020) Effects of ATIG welding on weld shape, mechanical properties, and corrosion resistance of 430 ferritic stainless steel alloy.Metals, 10(3), 404-412
https://doi.org/10.3390/met10030404
Vairamani, V., Mohan, N., Karthikeyan, S., Sakthivel, M. (2020) Optimization and microstructure analysis of Corten steel joint in mag welding by post heat treatment.Materials Today: Proceedings, 21, 673-680
https://doi.org/10.1016/j.matpr.2019.06.737
Verma, J., Taiwade, R.V., Kataria, R., Kumar, A. (2018) Welding and electrochemical behaviour of ferritic AISI 430 and Austeno-ferritic UNS 32205 dissimilar welds.Journal of Manufacturing Processes, 34, 292-302
https://doi.org/10.1016/j.jmapro.2018.06.019
Vidyarthy, R.S., Dwivedi, D.K. (2017) Analysis of the corrosion behavior of an A-TIG welded SS 409 weld fusion zone.MEPEG, 26, 5375-5384
https://doi.org/10.1007/s11665-017-3022-y
Webcorr, T.C.C. (2022) Intergranular corrosion: Weld decay. https://www.corrosionclinic.com/types_of_corrosion/weld_decay _weldment_corrosion.htm
Welders, P.T. (2023) What Is Shielded Metal Arc Welding (SMAW): [Complete guide]?. https://protigwelder.com/what-is-shieldedmetal-arc-welding
Wu, W., Hu, S., Shen, J. (2015) Microstructure, mechanical properties and corrosion behaviour of laser welded dissimilar joints between ferritic stainless steel and carbon steel.Materials & Design (1980-2015), 65, 855-861
https://doi.org/10.1016/j.matdes.2014.09.064
Zhang, H., Hu, S., Shen, J., Ma, L., Yin, F. (2015) Microstructures and mechanical properties of 30Cr4Mo ferritic stainless steel joints produced by double-pulsed gas metal arc welding.The International Journal of Advanced Manufacturing Technology, 80(9-12), 1975-1983
https://doi.org/10.1007/s00170-015-7173-4
Zhang, X., Fan, L., Xu, Y., Li, J., Xiao, X., Jiang, L. (2015) Effect of aluminium on microstructure, mechanical properties and pitting corrosion resistance of ultrapure 429 ferritic stainless sheets of steel.Materials & Design, (1980-2015), 65, 682-689
Downloads
Published
Issue
Section
License
Copyright (c) 2023 CC BY 4.0 by Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
