The impact of platinum loading on Pt-modified Bi catalysts for the electrooxidation of formic acid

Authors

DOI:

https://doi.org/10.62638/ZasMat1834

Abstract

Herein, a comparison between Pt and Pt-modified Bi catalysts has been studied. The Pt-on-Bi catalysts were prepared by electrodeposition of Pt on the pre-prepared Bi using chronopotentiometry. The quantity of Bi was kept constant, while the amount of Pt was adjusted to establish molar ratio of Pt to Bi of 0.1: 1, or 1:1 or 10: 1.To ensure accurate comparison, a Pt electrode was constructed using the same electrochemical method and quantity as the Pt-modified Bi electrode. The electrochemical properties of the Pt and Pt-on-Bi catalysts were evaluated with the aid of cyclic voltammetry (CV) and chronoamperometry (CA) recorded in 0.1 M H2SO4. All Pt-on-Bi catalysts were found to be more active toward formic acid (FA) electrooxidation compared to pure Pt, exhibiting maximum activity on the Pt-on-Bi catalyst with a Pt to Bi atomic ratio of 1:1 (Pt1@Bi). Moreover, the Pt/Bi atomic ratio is associated with the oxidation pathway of FA indicating that the selectivity of Pt-on-Bi electrocatalysts was affected by Pt loading and hence surface morphology. It was shown that the presence of Bi in the structure of the bimetallic catalyst provides a lower susceptibility to the poisoning regarding the Pt catalyst. The accomplished electrochemical performance of the Pt1@Bi electrocatalyst in FA electrooxidation is due to improved utilization of Pt and a balanced Pt/Bi composition.

Keywords:

bismuth, electrodeposition, catalyst composition, selectivity

References

Z. Fang, W. Chen (2021) Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts, Nanoscale Adv., 3, 94-105. https://doi.org/10.1039/D0NA00803F

V. E. Guterman, K.Paperzh, E. Zaitseva, A. Khudoley, E. Vetrova, A. Nevelskaya, A. Metelitsa, I. Pankov, M. Danilenko, A. Nikulin (2026) Integrated in situ RGB colorimetry and redox potential monitoring as a strategy for controlled synthesis of platinum nanostructures, J. Electrochem. Sci. En., 16, 3224. https://doi.org/10.5599/jese.3224

Y. Li, M.-S. Yao, Y. He, S. Du (2025) Recent advances of electrocatalysts and electrodes for Direct Formic Acid Fuel Cells: from nano to meter scale challenges, Nano-Micro Lett., 17, 148. https://doi.org/10.1007/s40820-025-01648-w

No. Shaari, S. K. Kamarudin, R. Bahru, S. H. Osman, N. A. Izzati Md Ishak (2021) Progress and challenges: Review for direct liquid fuel cell, Int. J. Energy Res., 45, 6644–6688. https://doi.org/10.1002/er.6353

G. Yang, J. Liang, T Lei, Y. Zhang, L. Zhang (2025) Formic acid-assisted electrochemical deposition of CoMo-P on ZIF-67 derived NiCo LDH towards enhanced overall water splitting performance, Surf. Interfaces, 63, 106329. https://doi.org/10.1016/j.surfin.2025.106329

G.A.G. Pedroza, C.A.C. de Souza, M.D. de Jesus, L.R.P. de Andrade Lima, D.V. Ribeiro (2014) Influence of formic acid on the microstructure and corrosion resistance of Zn–Ni alloy coatings by electrodeposition, Surf. Coat. Tech., 258, 232-239. doi.org/10.1016/j.surfcoat.2014.09.022

X. Fu, H. Li, A. Xu, F. Xia, L. Zhang, J. Zhang, D. Ma, J. Wu, Q. Yue, X. Yang, Y. Kang (2023) Phase Engineering of Intermetallic PtBi2 Nanoplates for Formic Acid Electrochemical Oxidation, Nano Lett., 23 (12) 5467–5474. https://doi.org/10.1021/acs.nanolett.3c00528

C.-Y. Wang, Z.-Y. Yu, G. Li, Q.-T. Song, G. Li, C.-X. Luo, S.-H. Yin, B.-A. Lu, C. Xiao, B.-B. Xu, Z.-Y. Zhou, N. Tian, S-G Sun (2020) Intermetallic PtBi Nanoplates with High Catalytic Activity towards Electro-oxidation of Formic Acid and Glycerol, Chemelectrochem, 7, 239-245. doi.org/10.1002/celc.201901818

J.D. Lović, S.I. Stevanović , D.V. Tripković , V.M. Jovanović , R.M. Stevanović , A.V. Tripković , K.Dj. Popović (2014) Catalytic activities of Pt thin films electrodeposited onto Bi coated glassy carbon substrate toward formic acid electrooxidation, J. Electroanal. Chem., 735, 1–9. DOI: 10.1016/j.jelechem.2014.09.036

M. Łukaszewski, M. Soszko, A. Czerwiński (2016) Electrochemical Methods of Real Surface Area Determination of Noble Metal Electrodes – an Overview, Int. J. Electrochem. Sci., 11, 4442 – 4469. doi: 10.20964/2016.06.71

Byung-Jun Kim, Kihyun Kwon, Choong Kyun Rhee, Jonghee Han, Tae-Hoon Lim (2008) Modification of Pt nanoelectrodes dispersed on carbon support using irreversible adsorption of Bi to enhance formic acid oxidation, Electrochim. Acta, 53, 7744–7750. https://doi.org/10.1016/j.electacta.2008.05.061

S. Taylor, E. Fabbri, P. Levecque, T. J. Schmidt, O. Conrad (2016) The Effect of Platinum Loading and Surface Morphology on Oxygen Reduction Activity, Electrocatal., 7, 287–296. DOI 10.1007/s12678-016-0304-3

F. J. E. Scheijen, G. L. Beltramo, S. Hoeppener, T. H. M. Housmans, M. T. M. Koper (2008) The electrooxidation of small organic molecules on platinum nanoparticles supported on gold: influence of platinum deposition procedure, J. Solid State Electrochem., 12, 483–495. https://doi.org/10.1007/s10008-007-0343-z

J.D. Lović, A.V. Tripković, S.Lj. Gojković, K.Dj. Popović, D.V. Tripković, P. Olszewski, A. Kowal (2005) Kinetic study of formic acid oxidation on carbon-supported platinum electrocatalyst, J. Electroanal. Chem., 581, 294‒302. https://doi.org/10.1016/j.jelechem.2005.05.002

J. K. Yoo, C. K. Rhee (2016) Formic acid oxidation on Bi-modified Pt surfaces: Pt deposits on Au versus bulk Pt, Electrochim. Acta, 216, 16-23. doi.org/10.1016/j.electacta.2016.09.007

W. Gao, J. A. Keith, J. Anton, T. Jacob (2014) Theoretical Elucidation of the Competitive Electro-oxidation Mechanisms of Formic Acid on Pt(111), J. Am. Chem. Soc., 1363(8) 13110–13113. https://doi.org/10.1021/ja1083317

V. Grozovski, J. Solla-Gullon, V. Climent, E. Herrero, J.M. Feliu (2010) Formic acid oxidation on shape-controlled Pt nanoparticles studied by pulsed voltammetry, J. Phys. Chem. C, 114 (32) 13802–13812. https://doi.org/10.1021/jp104755b

T. Duan, R. Zhang, L. Ling, B. Wang (2016) Insights into the effect of Pt atomic ensemble on HCOOH oxidation over Pt-decorated Au bimetallic catalyst to maximize Pt utilization, J. Phys. Chem. C, 120 (4) 2234–2246. https://doi.org/10.1021/acs.jpcc.5b10831

A. Cuesta, G. Cabello, M. Osawa, C. Gutiérrez (2012) Mechanism of the Electrocatalytic Oxidation of Formic Acid on Metals, ACS Catal., 2 (5) 728–738. https://doi.org/10.1021/cs200661z

L. Pérez-Martínez, E. Herrero, A. Cuesta (2023) Kinetics of formic acid dehydration on Pt electrodes by timeresolved ATR-SEIRAS, J. Chem. Phys.,158, 094705. doi: 10.1063/5.0138791

A. O. Elnabawy, J. A. Herron, Z. Liang, R. R. Adzic, M. Mavrikakis (2021) Formic acid electrooxidation on Pt or Pd monolayer on transition-metal single crystals: A first-principles structure sensitivity analysis, ACS Catal., 11 (9) 5294–5309. https://doi.org/10.1021/acscatal.1c00017

R. M. Antoniassi, H. Erikson, J. Solla-Gullón, R. M. Torresi, J. M. Feliu (2021) Formic acid electrooxidation on small, {1 0 0} structured, and Pd decorated carbon-supported Pt nanoparticles, J. Catal., 40, 140-147. doi.org/10.1016/j.jcat.2021.05.026

X. Ning, Xi. Zhou, J. Luo, L. Zhan (2022) PtBi on carbon cloth as efficient flexible electrode for electro-oxidation of liquid fuels, J. Electroanal. Chem., 904, 115958. doi.org/10.1016/j.jelechem.2021.115958

D. Zhang, J. Bu, X. Dou, Y. Yan, Q. Liu, X. Wang, Z. Sun, G. Guo, K. Zheng, Ji Deng (2024) Ultra-Large Two-Dimensional Metal Nanowire Networks by Microfluidic Laminar Flow Synthesis for Formic Acid Electrooxidation, Angew. Chem., 63 (32) e202408765. doi.org/10.1002/anie.202408765

Downloads

Published

17-11-2026

Issue

Section

Articles