Modern materials for cast rolls of hot strip mills
DOI:
https://doi.org/10.5937/zasmat2203300GKeywords:
cast rolls, microstructure, martensit, carbide, mechanical propertiesAbstract
The requirements for the work rolls for the various roll stands of hot strip mills are shown. The modern materials for cast rolls are analyzed and the operational performance of different types of rolls in different stands of the rolling mill is described. The trends in improvement of rolls performance were presented.References
Belzunce, F., Ziadi, A., Rodriguez, C. (2004) Structural integrity of hot strip mill rolling rolls.Engineering Failure Analysis, 11(5): 789-797
https://doi.org/10.1016/j.engfailanal.2003.10.004
Brandner, M., Windhager, M., Ziehenberger, K.H. (2008) Improvements in plate mill work rolls. in: SARUC 2008, Conference, May, Witbank, Republic of South Africa: Proceedings, 1-10
Brandner, M. (2008) Roll testing in production and in the rolling mill.Giesserei-Rundschau, 55(5/6): 83-87
Brandner, M., Paar, A., Mul, S. (2019) Carbide reinforcement for finishing mill rolls and the effect on the results and strip surface. in: 11 th International Rolling Conference, ABM Week 2019, October 1st -3rd , Sāo Paulo, Brazil: Proceedings, Brazil, proceedings, 11: 1-12
Brandner, M., Paar, A., Mul, S. (2020) New alloying concept for finishing mill rolls including results in application and surface tests.Technologia em Metalurgia, 17(2): 137-148
https://doi.org/10.4322/2176-1523.20202277
Delaunois, F., Sinnaeve, M., Vitry, V. (2011) Effect of Ti, V and Nb carbide on the properties of ICDP cast iron finishing rolls. in: International conference Abrasion 2011, August 21-24, Liege, Belgium: Proceedings, 111-122
Goryany, V., Myronova, O., Buch, J., Buch, A., Stein, F. (2019) Thermal-fatigue resistant work rolls for hot rolling mills.Materials Testing, (5): 397-404
https://doi.org/10.3139/120.111333
Goryany, V., Mauk, P.J. (2007) Hot rolling millsmodern materials for cast rolls.Giesserei, 94: 32-51
Goryany, V., Myronova, O., Buch, J., Buch, A., Stein, F. High-performance HSS roll rings. in progress
Goryany, V., Mauk, P.J. (2007) Process to produce cast rolls for hot rolling mills.Giesserei, 94(2): 60-63
Goryany, V., Schubrikoff, E., Myronova, O. (2020) Roll optimization via numerical modelling of stress distribution.Materials Testing, 62(1): 35-39
https://doi.org/10.3139/120.111447
Hattori, T., Haberkorn, C., Oda, N., Maeda, N. (2013) New HSS work rolls for the later stands of the finishing train of hot strip mills. in: International annual steel conference 2013, November, Congress Center Düsseldorf, Düsseldorf, Germany
Hattori, T., Oda, N., Maeda, N. (2014) New Type of HSS work roll for later stands in hot strip mill finishing trains.Stahl und Eisen, 134(3): 55-62
Hattori, T., Oda, N., Maeda, N. (2015) Latest developments of cast rolls for hot strip mill finishing trains and other rolling mills. in: Roll5 2015. Optimising value from rolls, 16-16
Hinnemann, M., Mauk, P.J., Goryany, V., Zybill, C., Braun, R. (2014) Measurement of residual stresses in work and backup rolls for strip and plate mills and its effect on the final load situation.Key Engineering Materials, 949-955
https://doi.org/10.4028/www.scientific.net/KEM.622-623.949
Hinnemann, M., Braun, R., Mauk, P.J., Weyh, B., Myronova, O., Goryany, V., Zybill, C. (2015) Roll loadings and their effects on stresses and strains in big work and backup rolls for plate and strip mills. in: AIS-Tech 2015, 4-7 May, Cleveland, Ohio, USA
Hinnemann, M. (2018) Investigation of the state of stress and deformation of large back-up and work rolls under operational loads. Duisburg, Germany: University of Duisburg-Essen, Dr.-Ing. thesis
Karagöz, S., Riedl, R., Gregg, M.R., Fischmeister, H. (1983) Role of M2C carbides in high-speed steels.Practical Metallography, 14(Special Edition), p.369-382
Kremnev, L.S. (2008) Theory of alloying and development of creep-resistant tool steels and alloys.Metal Science and Heat Treatment of Metals, 11: 18-27
Kremnev, L.S. (1991) Theory of alloying high-speed steel.Metal Science and Heat Treatment of Metals, 6: 10-14
https://doi.org/10.1007/BF00775374
Kulmburg, A. (1998) The microstructure of tool steels: An overview for the practice. Part I: Classification, systematics and heat treatment of tool steels.Practical Metallography, 35(4): 180-202
https://doi.org/10.1515/pm-1998-350402
Lecomte-Beckers, J., Tchuindjang, J.J. (2012) Current developments of alloying steels for hot strip roughing mills: Characterization of high-chromium steel and semi-hss speed steel.Iron & Steel Technology, 2: 33-40
Lecomte-Beckers, J., Sinnaeve, M., Tchuindjang, J.J. (2011) Comparison between HCS and semi-HSS grades used as work rolls in the roughing stands of hot strip mills. in: SARUC 2011: Southern African roll users conference, 6-7 Oct., Vanderbijepark, Gauteng, South Arfica: Proceedings, 35-40
Lichtenegger, G., Jeglitsch, F., Pöckl, G., Hackl, G. (1996) Carbides in high speed steels: Aspects of alloy development: Process in Tool Steels. Bochum, Germany: Schürmann, 17-26
Martiny, F. (2003) Contribution to the topic of 'fire cracks' on hot work rolls, in particular the ratio honeycomb size/ crack depth. Siegen, Germany, 1-37
Mayr, A., Baumgart, W. (2009) The creation of the desired microstructure using thermal analysis.Giesserei-Rundschau, 56(11/12), 189-192
Mayr, A. (2010) Graphite precipitates in indefinite cast iron materials for rolls. Clausthal-Zellerfeld, Germany: Clausthal University of Technology, Dr.-Ing. thesis
Morikawa, H., Tsujimoto, Y. (2011) Development of new type indefinite chilled double poured cast iron (ICDP) work roll with higher wear resistance. in: International conference abrasion 2011, August 21-24, Liege, Belgium: Proceedings, 91-99
Oda, N., Fleiner, P., Hattori, T. (2013) Latest developments of a new technology HSS work roll for later stands (F4-F7) in hot strip mill finishing trains.Iron & Steel Technology, 10(11): 56-62
Oda, N., Fleiner, P., Tushiyuki, H. (2013) Latest developments of a new technology HSS work roll for later stands (f4-f7) in hot strip mill finishing trains.AISTech, 1977-1984
Oda, N., Nozaki, Y., Oohata, T., Fleiner, P., Tukunaga, T., Era, H. (2011) State of the art' HSS work roll for later stands (f4-f7) in hot strip mill finishing trains. in: AISTech 2017, May 8-11, Neshville, Tennessee, USA, proceedings, Neshville, Tennessee, USA, proceedings, 2657-2665
Pellizzari, M., Molinari, A., Biggi, A., Corbo, G., Tremea, A. (2005) Semi high speed steels for roughing rolls with improved thermal fatigue resistance.La Metallurgia Italiana, 9: 57-61
Prenni, L.J., McGregor, J. (2000) Technology enhanced work rolls for the roughing mill application. in: 42 nd Mechanical working and steel processing conference, Vol. XXXVIII, Toronto, Ontario, Canada, October 22-25, Warrendale, PA, USA: Iron and Steel Society, p. 675-684
Radon, J.C., Burns, D.J., Benham, P.P. (1966) Pushpull low-endurance fatigue of cast irons and steels.Journal of the Iron and Steel Institute, 204(9): 928-935
Ryu, J.H., Ryu, H.B. (2000) Correlation of rolled-in defects in IF steel and the thermal fatigue properties of the hot strip mill work rolls. in: 42 nd Mechanical working and steel processing, Iron & Steel Society, Vol. XXXVIII, p. 223-231
Sinnaeve, M. (2006) HSS work rolls for hot mill finishing stands: Keys to success. in: AISTech 2010, May 3-6, Pittsburgh, PA, USA: Proceedings, Pittsburgh, PA, USA, proceedings, vol. II, p.279-292
Tchuindjang, J., Sinnaeve, M., Lecomte-Beckers, J. (2011) Influence of high temperature treatment on in situ transformation of Mo-rich Carbides in HSS and Semi-HSS grades. in: International conference Abrasion 2011, August 21-24, Liege, Belgium: Proceedings, p.61-75
Tremea, A., Grespi, M. (2011) Work rolls behaviour in the roughing stands at south American hot strip mills. in: LAMINAÇÃO 2011, 48 Seminar o de Laminaçāo, Santica, Spain, 62-69
Webber, R. (2017) Analysis of total cost of ownership models for mill rolls.Iron & Steel Technology, 1: 56-60
Windhager, M., Ziehenberger, K.H. (2009) Roughing mill wok rolls for hot strip production. in: V.B. Ginzburg [ed.] Flat-rolled steel processes: Advanced technologies, Boca Raton, Florida, USA: CRC Press, p. 63-70
https://doi.org/10.1201/9781420072938-c5
Ziehenberger, K.H., Windhager, M. (2006) Recent developments in HSM rougher rolls: Risks and chances.Iron & Steel Technology, 9, 38-41
Ziehenberger, K.H., Windhager, M. (2007) State of the art work rolls for hot rolling flat products. in: CONAC 2007, 3 rd Steel industry conference and exposition 11 th to 14 th November, Centro Convex, Monterrey, N.L., México, 1-12
Zybill, C., Overkott, T., Gangadhar, S., Goryany, V., Myronova, O., Schubrikoff, E., Buch, J. (2012) Advancement in roll technology: New high performance roll materials with focus on roughing stands
Zybill, C., Goryany, V., Neumann, M., Buch, J. (2015) New high-performance roll materials for hot rolling of flat steel. in: Optimising value from rolls. 22-24 April, ICC Birmingham, UK: Proceedings, Birmingham, UK, 1-10
Zybill, C., Goryany, V., Schubrikoff, E., Schwens, R., Buch, J. (2014) New high-performance roll materials for hot rolling of steel. in: AISTech 2014, 5-8 May, Indianapolis, Indiana, USA: Proceedings, 2819-2828
Zybill, C., Schubrikoff, E., Goryany, V., Hinnemann, M., Buch, J. (2014) Stress field in rolls under load: Measurement and FEM calculations. in: 15 th international conference metal forming, sept. 21-24, Palermo, Italy
https://doi.org/10.4028/www.scientific.net/KEM.622-623.1015
Zybill, C., Schubrikoff, E., Goryany, V., Hinnemann, M., Buch, J. (2014) Stress field in rolls under load: Measurement and FEM calculations.Key Engineering Materials, 622-623, 1015-1022
https://doi.org/10.4028/www.scientific.net/KEM.622-623.1015
Zybill, C., Goryany, V., Neumann, M., Buch, J., Röm-Schied, M. (2015) New graphitised HSS materials for rolls in finishing stands. Düsseldorf, Germany, p. 1-5
Zybill, C., Goryany, V., Myronova, O., Schubrikoff, E., Buch, J. (2012) New HSS materials for composite rolls for hot and cold rolling mills.Steel Research International, 83 (Special Edition), 891-894
Zybill, C., Goryany, V., Myronova, O., Schubrikoff, E., Overkott, T., Buch, J. (2015) New high-performance roll materials for hot rolling of steel. International conference on rolling and finishing technology of steel. SAIL Ranchi
Zybill, C., Goryany, V., Buch, J., Myronova, O., Röm-Schied, M. (2015) New graphitized HSS materials for rolls in finishing stands. Stahl und Eisen, 135: 61-64
Downloads
Published
Issue
Section
License
Copyright (c) 2022 CC BY 4.0 by Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
