Rings for compound rolls of rolling mills
DOI:
https://doi.org/10.62638/ZasMat1199Abstract
Modern materials for producing rings for compound rolls and their most important application properties are described. The advantages and disadvantages of rings made of cemented carbide, high-speed steel, ceramic materials and their damage mechanisms are analyzed. The structure of composite material rings made of cemented carbide/ iron-based alloys, HSS rings manufactured using powder metallurgy and melt metallurgy, and rings made of silicon nitride are described.
Keywords:
ring, compound roll, cemented carbide, high-speed steel, silicon nitride, clamping systemReferences
E.I.Klaphake,W.H.Rackoff (2002) Tungsten Carbide Rolls. In: Rolls for the Metalworking Industries. G.L.Lee (Ed.). Iron and Steel Society, Warrendale, PA, USA, 93-132.
K.-D.Leitzmann, W.Böhlke (1985) For the use of sintered cemented carbide roll rings in high-performance wire mills. Neue Hütte, (30)11, 417-421.
SinterMet LLC: Technical Recommendations to Optimize Roll Performance.Kittanning, PA, USA.
SinterMet LLC: Engineered Product Solutions. Kittanning, PA, USA.
D.N.French, D.A.Thomas (1965) Hardness anisotropy and slip in WC crystals. Transactions of the Metallurgical Society of AIME, (233)5, 950-952.
Y.Kusaba, S.Azuma (1997) Improvement of WC-roll wear in Tube Mill and Wire Rod Mill. Der Kalibreur, (58), 47-56.
O.Sommer (1997) Damage patterns for WC cemented carbides with Co-binders. In:Advances in Metallography. Vol. 28. W.-U.Kopp, M.Kurz (Ed.). Publisher DGM Informationsgesellschaft mbH, p. 295-300.
K.H.Cho, B.U.Cho (2010) Study of Crack Propagation Behavior of Sintered WC-Co-Ni-Cr Alloy under Periodic Loading and Heating. Der Kalibreur, (71), 15-26.
J.-E.Karlsson (2000) Cemented tungsten carbide as a roll material. Steel Times, (228)10, 370- 376.
D.Schuler, T.John (2005) SARACOM - roll rings for flat and angle rolls as well as for intermediate stands in steel bars and wire mills. Der Kalibreur, (66), 31-41.
L.Chen (2003) New Developments in cemented tungsten carbides and powder metal tool steel rolls for long product hot rolling applications. Rolls 2003. Programme and Conference Papers, Birmingham, UK, April 9-11, p. 1-11.
J.E.Karlsson (2008) Cement Carbide as Hot Roll Material - Today and Tomorrow.Der Kalibreur, (69), 19-32.
https://doi.org/10.1002/j.2831-865X.2008.tb00769.x
D.Schuler, T.John (2005) SARACOM - Roll Rings for Flats and Angles and Intermediate-Stands of Bar and Wire Rod Mills. Der Kalibreur, (66), 31-41.
V.Goryany, O.Myronova, E.Schubrikoff, J.Buch, F.Stein (2018) Non-metallic inclusions and fatigue strength of steel 34CrNiMo6. Materials Testing, (60)10, 1004-1012.
https://doi.org/10.3139/120.111243
V.Goryany, E.Schubrikoff, O.Myronova (2020) Roll optimization via numerical modeling of stress distribution. Materials Testing, (62)1, 35-39.
https://doi.org/10.3139/120.111447
J.E.Karlsson (2014) The roll choice - a way to increase rolling mill productivity. Der Kalibreur, (75), 8-13.
S.E.Lundberg (2004) Experiences of cemented carbide rolls in bar rolling. Cercetari Metalurgice si de noi Materiale, (12)1, 1-24.
A.B.Muller, S.Ya.Unru, B.I.Voronin, D.V.Nazarov, A.S.Limarev, O.N.Tulupov (2007) On the possibility of replacing cast iron rolls with carbide ones in the finishing group stands of wire mill 170. Bulletin of MSTU,(3), 65-68.
S.E.Lundberg (2011)Cemented Carbide Rolls for Rolling SBQ Bars. AISTech 2011, 2 - 3 May, Proceedings, Vol. 2, p. 297-309. Indianapolis, Indiana, USA.
S.E.Lundberg (2011)Cemented Carbide Rolls for Rolling SBQ Bars. Iron & Steel Technology, (8)9, 47-56.
L.I.Frayman (2017) Cemented Carbide Material for Hot Rolling Applications. General Carbide Corporation. Greensburg, PA, USA, p. 14.
https://doi.org/10.1016/S1350-4789(17)30200-3
Sandvik (2015) Sandvik Hyperion. Smart Rolling Solutions, p. 16.
V.Goryany (in preparation) Investigations of the composite material cemented carbide/ nodular cast iron.
SAAR-Hartmetall und Werkzeuge GmbH (2012) Roll rings, composite rolls and accessories for hot rolling mills, p. 12.
D.Schuler, W.Altmeyer, F.Kiefer (1997) High speed steel by powder metallurgy "SARAMET" and WC-steel composite rolls "SARACOM" for light section-, wire rod- and section mills. Der Kalibreur, (58), 7-20.
D.Schuller (2008) Use of Cemented Carbide Roll Rings in the Stands 8-10 of the Intermediate Mill of BELGO ARCELOR - Juiz de Fora - Brazil.Der Kalibreur, (69), 101-107.
V.Goryany, O.Myronova, J.Buch, A.Buch, F.Stein (2022)High-performance HSS-roll rings. Giesserei, (109)11, 44-51.
V.Goryany, O.Myronova, J.Buch, A.Buch, F.Stein (2023)High-performance HSS-roll rings. Casting Plant & Technology, 1, 24-31.
K.Bungardt, K.Kind, W.Oelsen (1955) The solubility of vanadium carbide in austenit. Archiv für das Eisenhüttenwesen, (27)1, 61-66.
https://doi.org/10.1002/srin.195602106
LS.Kremnev (2008) Theory of alloying and development of heat-resistant tool steels and alloys. Metal Science and Heat Treatment of Metals, (11), 18-27.
https://doi.org/10.1007/s11041-009-9097-9
C.Zybill, V.Goryany, E.Schubrikoff, R.Almeida, K.Fenners (2014) Integral solutions for rolls in section and bar rolling mills. Der Kalibreur, (75), 71-78.
G.Wötting, H.Drachsler (2004) Ceramic rolling tools made of silicon nitride for the production of wire, tube and strip. Symposium Ceramics for rolling technology, 17-18 March, Neuwied, Germany.
M.Schünemann, S.Waengler (2009)Ceramic rolls for wire rods - cost-effectiveness and quality.In: Rolling with ceramics. Proceedings of the symposium on ceramics for rolling technology.28-29 July, Neuwied, Germany. A.Kailer (Ed.), Fraunhofer Publishing, Stuttgart, Germany, p. 85-94.
V.Goryany, R.Wagner (2011) Ceramic Materials for Rolls and other Components for Hot Rolling.Materials Testing, (53)11, 748-757.
https://doi.org/10.3139/120.110284
V.Goryany, P.J.Mauk, J.Giersbach (2011) Ceramic work rolls for rolling thin steel foils in the 20-roll Sendzimir mill. Materials Testing, (53)10, 643-648.
https://doi.org/10.3139/120.110272
R.Danzer, M.Lengauer, W.Harrer (2009) Strength and application limits of ceramic wire rolls. In: Rolling with ceramics. Proceedings of the symposium on ceramics for rolling technology. 28-29 July, Neuwied, Germany. A.Kailer (Ed.), Fraunhofer Publishing, Stuttgart, Germany, p. 95-111.
R.Wagner (2009) Ceramic development and production. Ceramic rolls for wire rods - economy and quality.In: Rolling with ceramics. Proceedings of the symposium on ceramics for rolling technology.28-29 July, Neuwied, Germany. A.Kailer (Ed.), Fraunhofer Publishing, Stuttgart, Germany, p. 33-48.
W.Zleppnig (2009) Wire rolls, driver rolls and guide rolls for high-strength steel alloys, economy and quality. In: Rolling with ceramics. Proceedings of the symposium on ceramics for rolling technology.28-29 July, Neuwied, Germany. A.Kailer (Ed.), Fraunhofer Publishing, Stuttgart, Germany, p. 79-84.
V.Goryany, O.Myronova (2023) Ceramic rolls for rolling of steel foils. Zaštita Materijala, (64)1, 48-57.
https://doi.org/10.5937/zasmat2301048G
P.J.Mauk (2009) Rolling technical aspects and requirements. In: Rolling with ceramics. Proceedings of the symposium on ceramics for rolling technology.28-29 July, Neuwied, Germany. A.Kailer (Ed.), Fraunhofer Publishing, Stuttgart, Germany, p. 113-130.
C.Overhagen, P.J.Mauk (2014) Ceramic materials for rolls and rolling tools in hot and cold rolling. Stahl und Eisen, (134)5, 53-60.
V.V.Pashinsky, D.G.Sidorenko (2013) Use of carbide banded rolling rolls for the production of reinforcing profiles. Metallurgical and Mining Industry, 3, 75-78.
Tungsten Carbide Rolls. ILJIN Diamond, Seoul, South Korea.http://www.diamondsolution.it/assets/ Uploads/rulli-laminazione.pdf
D.-W.Bae (2012) Case study on the improvement of clamping mechanism for tungsten carbide composite rolls. 2012 SEAISI Conference and Exhibition, ASEAN Steel Industry: Anticipating, Opportunities, Grows and Chalanges. Nusa Dua, ID, May,p. 28-31.
