Influence of adhesive additives on the properties of bitumen and asphalt mixtures

Authors

  • Leonid Dvorkin National University of Water and Environmental Engineering Author
  • Vitalii Marchuk National University of Water and Environmental Engineering Author
  • Mykola Kuzlo National University of Water and Environmental Engineering Author

DOI:

https://doi.org/10.62638/ZasMat1170

Keywords:

bitumen, asphalt mixtures, strength, adhesive additives, penetration, softening point, ductility.

Abstract

This article presents the results of experimental studies of the influence of adhesive additives on the basic properties of modified bitumen and asphalt concrete mixtures based on it. The introduction of adhesive additives improves the basic properties of bitumen, which are necessary for obtaining high-quality asphalt concrete mixtures. Modification of bitumen increases adhesion to glass and crushed stone. Using methods of mathematical planning of experiments, experimental and statistical models of water saturation and compressive strength of asphalt concrete mixtures at temperatures of 20°C and 50°C were obtained. The introduction of modifying additives can significantly reduce the water saturation of asphalt concrete mixtures and increase strength at temperatures of 20 °C and 50 °C.

Author Biographies

  • Leonid Dvorkin, National University of Water and Environmental Engineering

    Department of Construction Materials Technology and Material Science, Head of Department

  • Vitalii Marchuk, National University of Water and Environmental Engineering

    Department of Construction Materials Technology and Material Science, Assosiative professor

  • Mykola Kuzlo, National University of Water and Environmental Engineering

    Department of Automobile Roads and Foundations, Head of Department

References

McBain, J. W., and D. G. Hopkins. "On adhesives and adhesive action." The Journal of Physical Chemistry 29, no. 2 (1925): 188-204. https://doi.org/10.1021/j150248a008.

Deryagin, B. V., and N. A. Krotova. Adhesion. Ed. USSR Academy of Sciences, 1949, p.12. (in Russian).

Krotova, N. "About gluing and adhesion." Ed. USSR Academy of Sciences, 1956, p. 91. (in Russian).

Bancroft, M. Applied Colloid Chemistry. McGraw-Hill, New York, 1926, p. 81.

De Bruyne, N. "Aircraft Eng." Aircraft Engineering and Aerospace Technology 16, no. 115 (1947): 18-23. https://doi.org/10.1108/eb031117.

McLaren, A., and C. J. Seiler. "J. Polymer Sci." Journal of Polymer Science 4 (1949): 63-71. https://doi.org/10.1002/pol.1949.120040105.

McLaren, A. Symposium "Adhesion and Adhesives". John Wiley and Sons, 1954, p. 57.

Ma, L., A. Varveri, R. Jing, and S. Erkens. "Comprehensive review on the transport and reaction of oxygen and moisture towards coupled oxidative ageing and moisture damage of bitumen." Construction and Building Materials 283 (2021): 122632. https://doi.org/10.1016/j.conbuildmat.2021.122632.

Rossi, C. O., B. Teltayev, and R. Angelico. "Adhesion promoters in bituminous road materials: A review." Applied Sciences 7 (2017): 524. https://doi.org/10.3390/app7050524.

Tarefder, R., and A. Zaman. "Nanoscale evaluation of moisture damage in polymer modified asphalts." Journal of Materials in Civil Engineering 22 (2010): 714-725. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000072.

Cihlářová, D., I. Fencl, S. Cápayová, and P. Pospíšil. "Use of adhesion promoters in asphalt mixtures." Slovak Journal of Civil Engineering 26 (2018): 19-24. https://doi.org/10.2478/sjce-2018-0003.

Choudhary, J., B. Kumar, and A. Gupta. "Effect of filler on the bitumen-aggregate adhesion in asphalt mix." International Journal of Pavement Engineering 21 (2020): 1482-1490. https://doi.org/10.1080/10298436.2018.1549325.

Terrel, R., and J. Shute. "Summary Report on Water Sensitivity." Strategic Highway Research Program, National Research Council, Washington, D.C., 1989. http://onlinepubs.trb.org/Onlinepubs/shrp/shrp-A-IR-89-003/SHRP-AIR-003.pdf.

Moraes, R., R. Velasquez, and H. U. Bahia. "Measuring the effect of moisture on asphalt-aggregate bond with the bitumen bond strength test." Journal of the Transportation Research Board 2209 (2011): 65-71. https://doi.org/10.3141/2209-09.

Boulangé, L., E. E. Bonin, and M. Saubot. "Physicochemical characterizations of the bitumen-aggregate interface to get a better understanding of stripping phenomena." Road Materials and Pavement Design 14, no. 2 (2013): 384-403. https://doi.org/10.1080/14680629.2013.803494.

Ramon-Torregrosa, P. J., M. A. Rodriguez-Valverde, A. Amirfazli, and M. A. Cabrerizo-Vilchez. "Factors affecting the measurement of roughness factor of surfaces and implication for wetting studies." Colloids and Surfaces A: Physicochemical and Engineering Aspects 404 (2008): 83-93. https://doi.org/10.1016/j.colsurfa.2007.10.032.

Grenfell, J., N. Ahmad, Y. Liu, A. Apeagyei, D. Large, and G. Airey. "Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage." Road Materials and Pavement Design 15 (2014): 131-152. https://doi.org/10.1080/14680629.2013.863162.

Robertson, R. "Chemical properties of asphalts and their effects on pavement performance." Transportation Research Circular 499 (2000): 49-54. http://onlinepubs.trb.org/onlinepubs/shrp/SHRP-91-510.pdf.

Rice, J. M. "Relationship of aggregate characteristics to the effect of water on bituminous paving mixtures." Symposium on Effect of Water on Bituminous Paving Mixtures, ASTM STP 240 (1958): 17-34. https://doi.org/10.1520/STP39327S.

Tarrer, A., and V. Wagh. "The Effect of the physical and chemical characteristics of the aggregate on bonding." SHRP-A/UIR-91-507, 1991, p. 31. http://onlinepubs.trb.org/onlinepubs/shrp/SHRP-91-507.pdf.

Paliukaitė, M., V. Vorobjovas, M. Bulevičius, and V. Andrejevas. "Evaluation of different test methods for bitumen adhesion properties." Transportation Research Procedia 14 (2016): 724-731. https://doi.org/10.1016/j.trpro.2016.05.339.

Pstrowska, K., V. Gunka, I. Sidun, Y. Demchuk, N. Vytrykush, M. Kułażyński, and M. Bratychak. "Adhesion in Bitumen/Aggregate System: Adhesion Mechanism and Test Methods." Coatings 12 (2022): 1934. https://doi.org/10.3390/coatings12121934.

Kim, Y., I. Pinto, and S. W. Park. "Experimental evaluation of anti-stripping additives in bituminous mixtures through multiple scale laboratory test results." Construction and Building Materials 29 (2012): 386-393. https://doi.org/10.1016/j.conbuildmat.2011.10.012.

Dvorkin, L., O. Dvorkin, and Y. Ribakov. Mathematical Experiments Planning in Concrete Technology. Nova Science Publishers, 2011.

Downloads

Published

18-07-2024

Issue

On-line first

Section

Scientific paper

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.