Cerium(III)phosphotungstate: an efficient catalyst in esterification of fatty acids

Authors

  • Sonia Yadav Department of Chemistry, MMEC, MM(DU), Mullana, Ambala, 133207, Haryana, India Author
  • Nadeem Sharma Department of Chemistry, MMEC, MM(DU), Mullana, Ambala, 133207, Haryana, India Author

DOI:

https://doi.org/10.62638/ZasMat1067

Keywords:

Cerium (III) Phosphotungstate, Biodiesel, butyl stearate, fuel value, additives

Abstract

In this report, a known heteropolyacid salt (HPAs) cerium () phosphotungstate was synthesized in a volume ratio of 2:1:2 with a molar ratio of 1:1:1 of each ingredient. These HPAs are further utilized in form of a catalyst to generate biodiesel through the esterification of variable carbon chain length alcohols (methanol, ethanol, n-propanol, isopropanol, n-butanol) and stearic acid at different conditions of reaction. FTIR of the produced biodiesel was also done for the assurance of ester peaks in it. Analysis of some important biodiesel properties (density, dynamic viscosity, acid value, aniline point, boiling point, cloud and pour point, and flash and fire point) etc., to differentiate and validate the results. A large surface area of the catalyst i.e. 121.427 m2/g determined using the BET surface area analyser, supports the fact of outrageous catalytic action in the esterification reaction. The effect of additives was also studied on the properties of resultant biodiesel. The calorific value of the samples was measured at 7320 Kcal/kg without additive and 7512 Kcal/kg after adding toluene (as an additive) in the biodiesel generated in the study. The pour point temperature of the biodiesel with additives was observed even < 20.

References

A. Gaurav, S. Dumas, C. T. Mai, F. T. Ng (2019) A kinetic model for a single step biodiesel production from a high free fatty acid (FFA) biodiesel feedstock over a solid heteropolyacid catalyst, Green Energy & Environment, 4(3), 328-341.https://doi.org/10.1016/j.gee.2019.03.004.

Chandra, P., Enespa, Singh, R., & Arora, P. K. (2020). Microbial lipases and their industrial applications: a comprehensive review. Microbial cell factories, 19, 1-42.https://doi.org/10.1080/10408398.2022.2038076.

Lee, W. J., Zhang, Z., Lai, O. M., Tan, C. P., & Wang, Y. (2020). Diacylglycerol in food industry: Synthesis methods, functionalities, health benefits, potential risks, and drawbacks. Trends in Food Science & Technology, 97, 114-125.https://doi.org/10.1016/j.tifs.2019.12.032.

Sahu, A., & Pandit, A. B. (2019). Kinetic study of homogeneous catalyzed esterification of a series of aliphatic acids with different alcohols. Industrial & Engineering Chemistry Research, 58(8), 2672-2682.https://doi.org/10.1021/acs.iecr.8b04781.

De Lima, R., Bento, H. B., Reis, C. E., Bôas, R. N. V., de Freitas, L., Carvalho, A. K., & de Castro, H. F. (2022). Biolubricant production from stearic acid and residual secondary alcohols: system and reaction design for lipase-catalyzed batch and continuous processes. Catalysis Letters, 152(2), 547-558.https://doi.org/10.1007/s10562-021-03663-z.

Ibrahim, S. M. (2021). Preparation, characterization, and application of novel surface-modified ZrSnO4 as Sn-based TMOs catalysts for the stearic acid esterification with methanol to biodiesel. Renewable Energy, 173, 151-163.https://doi.org/10.1016/j.renene.2021.03.134.

Ahmed, R. A., Rashid, S., &Huddersman, K. (2023). Esterification of stearic acid using novel protonated and crosslinked amidoximated polyacrylonitrile ion exchange fibres. Journal of Industrial and Engineering Chemistry, 119, 550-573.https://doi.org/10.1016/j.jiec.2022.12.001.

Mahmoud, H. R., El-Molla, S. A., & Ibrahim, M. M. (2020). Biodiesel production via stearic acid esterification over mesoporous ZrO2/SiO2 catalysts synthesized by surfactant-assisted Sol-gel auto-combustion route. Renewable Energy, 160, 42-51.https://doi.org/10.1016/j.renene.2020.06.005.

Liu, W., Yin, P., Liu, X., Zhang, S., & Qu, R. (2015). Biodiesel production from the esterification of fatty acid over organophosphonic acid. Journal of Industrial and Engineering Chemistry, 21, 893-899.https://doi.org/10.1016/j.jiec.2014.04.029.

Vinod, N., Tiwari, R., Bhat, N. S., Mal, S. S., & Dutta, S. (2020, March). High-yielding synthesis of alkyl stearates from stearic acid within a closed batch reactor using heteropolyacids as efficient and recyclable catalyst. In AIP Conference Proceedings (Vol. 2225, No. 1). AIP Publishing.https://doi.org/10.1063/5.0005580.

Saravanan, K., Tyagi, B., & Bajaj, H. C. (2016). Esterification of stearic acid with methanol over mesoporous ordered sulfated zro2–sio2 mixed oxide aerogel catalyst. Journal of Porous Materials, 23(4), 937-946.https://doi.org/10.1007/s10934-016-0151-x.

Sangsiri, P., Laosiripojana, N., Laosiripojana, W., &Daorattanachai, P. (2022). Activity of a Sulfonated Carbon-Based Catalyst Derived from Organosolv Lignin toward Esterification of Stearic Acid under Near-Critical Alcohol Conditions. ACS omega, 7(44), 40025-40033.https://doi.org/10.1021/acsomega.2c04693.

Kastratovic, V., &Bigovic, M. (2018). Esterification of stearic acid with lower monohydroxylic alcohols. Chemical Industry and Chemical Engineering Quarterly, 24(3), 283-291.https://doi.org/10.2298/ciceq170327040k.

Han, X., Jiang, S., Chen, Z., Zeng, Z., Chen, Q., Niu, F., & Liu, S. B. (2023). Highly active sulfonic ionic liquid modified heteropoly acid composite catalysts for efficient production of ethyl palmitate. Renewable Energy, 118918.https://doi.org/10.1016/j.renene.2023.118918.

Raj, P. L. (2011). Synthesis, and Ion Exchange Characteristics of Cerium (IV) Phosphotungstate. Orient. J. Chem., 27(3), 1257-1260.https://doi.org/10.1007/bf02517309.

Camas-Anzueto J. L., Gómez-Pérez J., Meza-Gordillo R., Anzueto-Sánchez G., Pérez-Patricio M., López-Estrada F. R., Ríos-Rojas C. & (2017). Measurement of the viscosity of biodiesel by using an optical viscometer, Flow Meas. Instrum., 54,82-87.https://doi.org/10.1016/j.flowmeasinst.2016.12.004.

Bashiri S., Ghobadian B., Dehghani Soufi M., Gorjian S. (2021). Chemical modification of sunflower waste cooking oil for biolubricant production through epoxidation reaction, Mater. Sci. Energy Technol., 4, 119-127.https://doi.org/10.1016/j.mset.2021.03.001.

Esso, S. B. E., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., & Xiang, J. (2022). Review on synergistic effects during co-pyrolysis of biomass and plastic waste: Significance of operating conditions and interaction mechanism. Biomass and Bioenergy, 159, 106415.https://doi.org/10.1016/j.biombioe.2022.106415.

Folayan, A. J., Anawe, P. A. L., Aladejare, A. E., & Ayeni, A. O. (2019). Experimental investigation of the effect of fatty acids configuration, chain length, branching and degree of unsaturation on biodiesel fuel properties obtained from lauric oils, high-oleic and high-linoleic vegetable oil biomass. Energy Reports, 5, 793-806.https://doi.org/10.1016/j.egyr.2019.06.013.

Sehar, S., Sher, F., Zhang, S., Khalid, U., Sulejmanović, J., & Lima, E. C. (2020). Thermodynamic and kinetic study of synthesised graphene oxide-CuO nanocomposites: A way forward to fuel additive and photocatalytic potentials. Journal of Molecular Liquids, 313, 113494.https://doi.org/10.1016/j.molliq.2020.113494.

Ghodke, P. K., Sharma, A. K., Moorthy, K., Chen, W. H., Patel, A., &Matsakas, L. (2022). Experimental investigation on pyrolysis of domestic plastic wastes for fuel grade hydrocarbons. Processes, 11(1), 71.https://doi.org/10.3390/pr11010071.

Soudagar, M. E. M., Nik-Ghazali, N. N., Kalam, M. A., Badruddin, I. A., Banapurmath, N. R., & Akram, N. (2018). The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics. Energy Conversion and Management, 178, 146-177.https://doi.org/10.1016/j.enconman.2018.10.019.

Madiwale, S., Karthikeyan, A., & Bhojwani, V. (2017). A comprehensive review of effect of biodiesel additives on properties, performance, and emission. IOP Conference Series: Materials Science and Engineering, 197, 012015.https://doi.org/10.1088/1757-899x/197/1/012015.

Agarwal, A. K., & Das, L. M. (2001). Biodiesel development and characterization for use as a fuel in compression ignition engines. J. Eng. Gas Turbines Power, 123(2), 440-447.https://doi.org/10.1115/1.1364522.

Ba-Abbad, M. M., Kadhum, A. A. H., Mohamad, A. B., Takriff, M. S., &Sopian, K. (2012). Synthesis and catalytic activity of TiO2 nanoparticles for photochemical oxidation of concentrated chlorophenols under direct solar radiation. Int. J. Electrochem. Sci, 7(6), 4871-4888.https://doi.org/10.1016/s1452-3981(23)19588-5.

Mohammed T. (2022). Biodiesel Yield and Conversion Percentage from Waste Frying Oil Using Fish Shell at Elmina as a Heterogeneous Catalyst and the Kinetics of the Reaction", International Journal of Chemical Engineering, vol., Article ID 8718638, 9 pages, 2022.https://doi.org/10.1155/20

Downloads

Published

18-07-2024

Issue

Section

Scientific paper